So some CEEDs are coming with a full 40 pin connection to the hub board and some are coming with three individual jumper cables that only connect six of the forty pins. Why do these two versions exist and why do they seem to be given out at random?
I believe all CEEDs should come with the 40 pin connector. CEEDs with the jumpers CANNOT use the Pi-Top Proto board.
Worse though is the fact that the connectors on the jumpers are too long causing the wires to be in the way of closing the acrylic slice/cover. It can be closed but you can feel the friction of the wires against the cover. This seems like a serious design flaw. Repeatedly opening and closing the cover to get access to the GPIO pins is going to stress those wires to the breaking point.
The 40 pin connector does not interfere with the cover and gives you full access to the GPIO as long as you have a Proto board.
For those of us who got the jumper cable version, please make the 40 pin connector available.
I got one with the three cables and also experience them as too tall and the frustration that they are zero documented and I have no idea what they are for, except that if I start the pi-topCEED without them on alls seems to work just fine (as long as I power it).
I doubly found it painful that the one three pin connector has three black cables providing no orientation and a near invisible arrow I did not see at all and hence took a punt and put it on the wrong way, before using a torch, finding the arrow and putting it on the right way. No idea of of the consequences of running it with those three flipped and support has not answered me that!
I would love to see some documentation on the pi-top Hub, what it is, what it does, what all its pins are for and what exactly the three connectors to the Pi 3 are for!